This is a one-off build and is the only unit available. This lens has a focus pull ring surrounding the barrel, and is made from ABS 3D printing process and is may appear rough as it is not plastic mould injected. Focus pull is confirmed to work with Tilta Nucleus M Focus remote Pull gear set system, which produces a smooth motion which rotated beyond 180° to roughly 190° and 200° from end to end providing excellent precise pulling capabilities with a remote focus system. There is vignetting for full frame sensors.Ideal for Micro Four Thirds Sensor or ASPC Sensors or smaller fitted with 75mm or longer taking lenses. There may be slight vignetting for lenses smaller than 80mm on Micro Four Thirds Sensors. However we do not recommend using this with Full Frame Sensors as the barrel appears in footage. Fits anamorphic setup with Anamorphic Lens Clamp adapter front thread size of 72mm or 77mm. This lens is like the SLRMagic Rangefinder single focus solution. See image for example setup. The image shows Single focus adapter mounted to a anamorphic lens clamp with 77mm thread.
Winning purchaser May use a 77mm clamp adapter or a 72mm one. The anamorphic lens in the image is a 2x ISCOSTAR adapter lens.
What is included in listing. Only the VORMAX Single focus adapter with rear 72mm anamorphic clamp thread. Orange Custom 95mm 3D Printed gutting lens cap.
72mm to 77mm Step-up ring for 77mm anamorphic clamp thread. Please note: no other lenses or accessories pictured are included.Great for anamorphoc shooters using sensors under full frame such as Blackmagic, Sony, or Canon. The item "VORMAX 72mm 77mm Anamorphic Single focus Dual Focus Taking Lens SLRMagic M43" is in sale since Tuesday, March 16, 2021. This item is in the category "Cameras & Photo\Lenses & Filters\Lenses". The seller is "chekprofile" and is located in Hawthorne, California. This item can be shipped worldwide.